Mazzulla 2005+ Toyota Tacoma Billet Upper Arm Kit # MZS-T1-1
This Mazzulla Offroad Upper Control Arm kit is designed for use with 2005 - 2022 Toyota Tacoma 6-lug trucks. This arm fits both the 2wd and 4x4 models. Does NOT fit any 5-lug models! This Mazzulla Upper Control Arm is designed only to work with the factory Toyota Steering Knuckle or any aftermarket steering knuckle or lift spindle that uses the same factory size upper ball-joint taper. Basically, if you are running a lift or leveling kit and currently have a factory upper control arm on your vehicle now this MZS-T1-1 should be a direct bolt-on replacement. Keep reading below for more details...
| Manufacturer | Mazzulla Offroad |
|---|---|
| Part Number | MZS-T1-1 |
| Vehicle Year | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005 |
| Vehicle Make | Toyota |
| Vehicle Model | Tacoma |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive, All-Wheel Drive |
| Made In USA | Yes |
Mazzulla Offroad Billet Upper Control Arm Kit # MZS-T1-1. These arms are machined in low volume using USA materials and the attention to detail are second to none. Mazzulla control arms start off as solid billets of high quality 6061 Aluminum and are machined by Mazzulla Offroad in-house in the USA. Mazzulla Billet Uniball upper control arms provide the ultimate in performance, strength and durability for the front suspension of your 2005 - 2022 Toyota Tacoma. After a lift or leveling kit has been installed an aftermarket upper control arm is usually needed to correct the camber and caster geometry so that the factory alignment can be achieved.
If you have installed aftermarket extended travel coilovers the factory upper arm ball-joint can bind at full droop (rebound) and can limit your suspension travel which reduces the on and off-road performance of your truck. The Mazzulla upper control arm features large 1.25" uniball bearings that offer more range of motion (no binding) as well as an increased strength and longevity over the stock parts they replace. Mazzulla includes a cover to reduce wear and tear on the UniBall by helping to seal it off against the elements. The provided Heim Joint spacers and Uniball taper pins are machined using heat treated Stainless Steel and hold a tolerance .0005" for precise fitment on bearing bores and in the factory upright tapers.
Features:
CAD designed and engineered
Manufactured in the USA
Billet machined 6061 Aluminum construction
FK Teflon lined 1.250" Uniballs
FK Heim Joint inner pivots
Stainless steel hardware
Aircraft grade 12 point pin hardware
17-4 heat treated stainless steel pins and spacers
O-ring sealed uniball cover
Maximum alignment capability compared to stock
Improved geometry for lifted applications
Silver anodize finish
Application Notes:
This item requires the use of aftermarket wheels with a maximum 4.75" inches of back space to prevent the tire from rubbing the arm. Please note that this item fits the 2005 - 2015 and 2016 - 2022 trucks 6-lug trucks only. Not for use on any 5-lug models!
For more information on this or any other Mazzulla Offroad product please click on the "ask a question" link located at the very top left of this page.
This item ships for FREE to any address in the 50 United States of America!
| Manufacturer | Mazzulla Offroad |
|---|---|
| Part Number | MZS-T1-1 |
| Vehicle Year | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005 |
| Vehicle Make | Toyota |
| Vehicle Model | Tacoma |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive, All-Wheel Drive |
| Made In USA | Yes |