Pro Comp 2019+ Silverado & Sierra 1500 6" Lift Kit # K1175M

Pro Comp Suspension 6" Suspension Lift Kit # K1175M is designed for use on the all new 2019, 2020, 2021 and 2022 Chevrolet Silverado 1500 and GMC Sierra 1500 series trucks. This 6" lift will fit 2wd and 4x4 standard suspension models only. Not for use on Trail Boss or AT4 package equipped models! The 2019+ GM half-ton pickups are built on an all new chassis and this required an all new suspension lift be designed. The new GM trucks still arrive with the front end sitting considerably lower than the rear so Pro Comp fixes that with this lift. More and more consumers are discovering that GM trucks look much better with a level stance so Pro Comp raises the front approximately 6" inches and the rear 4" inches. By raising the front of your Silverado or Sierra 1500 more than the back you get the great looks of a level truck and the ability to run up to 35" tires on a 20" or larger diameter wheel.

Kit Features:
The new high strength extended steering knuckles retain factory steering geometry and improve the steering feel and offers improved handling over older kit designs. The 3/16" thick steel front lower crossmembers and differential skid plate add strength to the chassis and protection for the front differential. The included Upper Strut Spacers retain the factory-tuned front shocks for same-as-factory ride quality. The rear is lifted using Rear Lift Blocks and extended length U-bolts. The included PRO-M MonoTube rear shocks are matched to the lift block height.

Installation / Warranty:
Installation is estimated at 8-9 hours for a professional mechanic with a lift and access to a full range of automotive tools. An alignment will be required after installation. This 6" lift kit includes the Pro Comp Promise – A Lifetime Warranty that is completely transferable. The included Lift Shield Warranty provides additional benefits beyond the standard vehicle warranty. Please contact Pro Comp for more information on their Lift Shield Warranty.

Tire / Wheel Information:
This Pro Comp Kit # 1175M requires the use of 20" or larger diameter rims. Use of 17" or 18" wheels is not possible due to the steering upright design. Pro Comp recommends that wheel width not exceed 10" inches and that the back space must not exceed 5.00 inches. The maximum recommended tire size for use with this lift is a 35x12.50.

Pro Comp K1175M Contents:
Qty 1 x Box 1 of 6 = 51070B-1
Qty 1 x Box 2 of 6 = 51070B-2
Qty 1 x Box 3 of 6 = 51070B-3
Qty 1 x Box 4 of 6 = 51070B-4
Qty 1 x Box 5 of 6 = 51070B-5
Qty 1 x Box 6 of 6 = 51070B-6
Qty 2 x Rear Shocks = PR2001

NOT FOR USE ON CHEVROLET TRAIL BOSS OR SIERRA AT4 TRUCKS!
NOT FOR USE ON VEHICLE EQUIPPED WITH ADAPTIVE RIDE CONTROL (ARC)

If you have any questions on this or any other ProComp Suspension product please click on the "ask a question" link located at the very top of this page.