Pro Comp Toyota Tundra Long Travel Control Arm & Ball-Joint Package

This package of parts is designed specifically for 2007 - 2021 Toyota Tundra owners that have the Pro Comp 4" Long Travel "PERFORMANCE SYSTEM" installed on their truck. These parts are only for use on Toyota Tundra trucks already equipped with an existing Pro Comp LONG TRAVEL Suspension lift system # K5150B. If your Toyota Tundra has worn out ball-joints that means your alignment cannot be adjusted and set properly. Worn out parts can cause bad steering control and uneven tire wear. New parts can help clean up the steering feel and help reduce uneven tire wear on your lifted Tundra!

Please Read and Comprehend This:

WE DO NOT ACCEPT RETURNS ON THIS ITEM! We're tired of people buying the wrong parts because they don't read the description. These Pro Comp products have a VERY SIMPLE fitment. Look at the pictures we've provided. The Tundra MUST BE EQUIPPED with the Pro Comp LONG TRAVEL suspension lift system for these parts to fit properly. The Pro Comp LONG TRAVEL suspension system is totally DIFFERENT than the regular Pro Comp 4", 6" and Pro Comp 7" lift systems. The Pro Comp Long Travel kit is very easy to identify. Look at the top of your Upper Control Arm. Do they say Pro Comp on them? If so, look at the bottom side of the upper control arm, does it look EXACTLY like the picture we've provided? Now it's time to look at your existing Outer Tie Rod Ends. The Pro Comp part numbers are CAST into the outer tie rod ends. Do the part numbers visible on your current Outer Tie Rod Ends match 90-40074 (passenger side) and/or 90-40073 (driver side) part numbers? If ALL of those answers are YES you can be confident this item is correct for your application. If not... you are looking at the wrong parts for your Tundra!

Please Read:

This item includes 1 Passenger Side Upper Control Arm # 90-40072 and 1 Passenger Side Lower Control Arm # 90-40080. It also includes 1 additional Upper Control Arm Ball-Joint and 1 additional Lower Control Arm Ball-Joint. Yes, you will end up with BRAND NEW control arms on the passenger side. Yes, you will have to keep your existing OLD driver side control arms. Unfortunately we no longer have any driver side arms.

Installation Information:

Press work will be required to remove the existing ball-joints from the DRIVER SIDE control arms. Press work will also be necessary to install the new ball-joints on the Driver Side upper and lower control arms. You must remove the dust boots from the new ball-joint BEFORE you press them into the arms. If you damage a boot during installation you will need to source new ones yourself... WE DON'T HAVE ANY! Large SNAP RING PLIERS will be required to remove the large C-clips that retain the upper and lower ball-joints. The snap ring on the upper control arm may be hidden by the dust boot. You will need to remove the dust boot BEFORE you will have a good look at the retention ring.

For more information on this Pro Comp product please click on the ASK A QUESTION link at the very top of this page.