Pro Comp Toyota Tundra Long Travel Outer Tie Rod Ends (pair)

Explorer Pro Comp Outer Tie Rod Ends # 9040073 and 9040074 are designed to replace worn out steering components on your 2007 - 2021 lifted Toyota Tundra. These Tie Rod Ends are only for use on Toyota Tundra trucks already equipped with a Pro Comp LONG TRAVEL Suspension lift system. If your Toyota Tundra has worn Outer Tie Rod Ends it means your alignment cannot be adjusted and set properly. Worn out parts means bad steering control and can cause uneven tire wear. New parts can help clean up the steering feel and reduce uneven tire wear on your lifted truck!

Please Read and Comprehend This:

WE DO NOT ACCEPT RETURNS ON THIS ITEM. We're tired of people buying the wrong parts because they don't read the description. This Pro Comp product has a VERY SIMPLE fitment. Look at the pictures we've provided. The Tundra MUST BE EQUIPPED with the Pro Comp LONG TRAVEL suspension lift system for these Outer Tie Rod Ends to fit properly. The Pro Comp LONG TRAVEL suspension system is totally DIFFERENT than the Pro Comp 6" or Pro Comp 7" lift systems. The Pro Comp Long Travel kit is very easy to identify. Look at the top of your Upper Control Arm. Do they say Pro Comp on them? If so, look at the bottom side of the upper control arm, does it look EXACTLY like the picture we've provided? Now it's time to look at your existing Outer Tie Rod Ends. The Pro Comp part numbers are CAST into the outer tie rod ends. Do the part numbers on your current Tie Rod Ends match the 9040073 and/or 9040074 part numbers that this item includes? If ALL of those answers are YES you can be confident this item is correct for your application. If not... you are looking at the wrong parts for your Tundra!

Please Read:

This item includes both the 9040073 (Driver Side) and 9040074 (Passenger Side) Outer Tie Rod End. Please look at the product images we have provided that show where to locate your existing outer tie rod part numbers to confirm what you are purchasing is correct.

Pro Comp Tie Rod End Wear:

A few customers have complained that their recently installed Pro Comp Outer Tie Rod Ends didn't last very long. We've found that most of the premature wear cases were caused by a simple installation failure. A lack of grease. You must PROPERLY GREASE these new tie rod ends before driving the vehicle. You must inject grease through the Zerk fitting AFTER the outer tie rod end is installed on the truck. Most installers skip this important step and then blame the part for the early failure.

The listed price includes one pair of Explorer Pro Comp Outer Tie Rod Ends and 2 cotter pins for the provided castle nuts.