ReadyLift 2004-2014 Ford F150 UniBall Upper Arm Kit # 44-2000
DISCONTINUED PRODUCT - NO LONGER AVAILABLE FOR PURCHASE
This ReadyLift OFFROAD 44-2000 Upper Control Arm Kit is designed for use on the 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 model year Ford F150 2wd and 4x4 trucks. This item does NOT fit Raptor models. This ReadyLift Ford F150 Upper Control Arm Kit is designed to install into the factory upper arm pivot location and features a uni-ball tapered pin adapter that allows this arm to be used with factory steering knuckles and most aftermarket lift spindles. Installation of this UCA kit is a 100% bolt-on item! This ReadyLift OFFROAD upper control arm kit is compatible with most aftermarket coilover and shock upgrade kits and is designed to allow for additional suspension travel by increasing the amount of droop (suspension extension). This arm is also considerably stronger than the factory arm and is designed to withstand serious off-road use. When paired with the right coilover this arm creates a nice mid-travel system.
Manufacturer | ReadyLIFT |
---|---|
Part Number | 44-2000 |
Vehicle Year | 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004 |
Vehicle Make | Ford |
Vehicle Model | F150 |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |
The ReadyLift Off-Road Upper Control Arm # 44-2000 is designed specifically for use on lifted 2004-2014 model year Ford F150 trucks. This arm fits both 2wd and 4x4 models. Please note that the uni-ball cup position on the control arm has been optimized for use on a lifted vehicle to provide the maximum amount of suspension travel possible. The ReadyLift 44-2000 includes a pair of control arms and all necessary installation hardware.
ReadyLift # 44-2000 Features:
1" Spherical Bearings
Tabbed and slotted plate construction
17-4 Stainless misalignment spacers
Delrin pivot bushings
4140 Heat treated pin
Grade 8 hardware
Semi-gloss black powder coat
Uni-Ball Top Cap Reduces Wear
The tab and slot design increases the overall strength of the ReadyLift Off-Road control arm by interlocking each plate. A 4340 heat treated conversion pin allows you to retain the factory steering uprights while running a super strong 1” uniball. The 1" Uniballs have been used in all forms of off road racing because of their reliability under extreme conditions. Zerk fittings are included that make greasing the urethane pivot bushings as easy as possible. This upper control arm kit is great for someone who has installed a bigger set of tires or someone who wants to increase the off road capability and reliability of their F150.
If you have any questions about this or any other ReadyLift OFFROAD product please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 50 United States of America!
http://performancelifts.com/ReadyLift-2004-Ford-F150-UniBall-Upper-Arm-Kit-44-2000.html
Manufacturer | ReadyLIFT |
---|---|
Part Number | 44-2000 |
Vehicle Year | 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004 |
Vehicle Make | Ford |
Vehicle Model | F150 |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |