ReadyLift 2018 - 2021 Subaru Crosstrek 1.5" SST Lift Kit # 69-9820

ReadyLift Subaru Crosstrek 2" SST Suspension Lift Kit # 69-9820. This suspension lift is designed for use on 2nd Generation 2018, 2019, 2020, 2021 and 2022 model year Subaru Crosstrek vehicles. It provides approximately 2.0" of front lift and 1.5" of rear lift. This lift combination creates an exceptional improved stance that, when combined with a P215/75-15 tire, results in a substantial increase of ground clearance at the rockers. It also offers a more aggressive appearance and the right amount of additional tire sidewall for a more comfortable and capable ride on and off road.

The 69-9820 arrives complete and ready to bolt-on. It requires no vehicle modifications, installs in half the time of other kits, and retains the factory camber and caster for ideal alignment courtesy of the unique offset spacer design. This Subaru Crosstrek SST Lift Kit maintains the factory driving dynamics while accommodating up to a 215/75-15 tire on a 15x7 wheel with +10 mm offset. (Minor trimming may be required depending on tire brand and tread design). The 69-9820 lift kit also includes front sway bar brackets to relocate the front end links back to the factory angles on the strut.

Why you don't need cradle drops on new generation Subaru's?
Subaru has revised the suspension design and geometry on newer CrossTrek, Outback, and Forester models. ReadyLIFT R&D has determined that a rear cradle drop is not necessary to achieve additional lift height while still keeping a proper alignment. Subaru engineers did an excellent job at retaining camber, caster and toe throughout the suspension travel and that means that a rear lift height increase of 1.5" (which is in the ReadyLift kits) will not need cradle drops. The rear spacers are designed to take this into account by only lifting the rear 1.5". The new 4 link designs using a triangulated upper arm, lower suspension carrying arm, trailing arm, and toe link; camber and toe are set to optimal geometry throughout the suspension cycle. Camber increases were thought out with the engineers and our kit stays within this max travel range that was designed.

Tire & Wheel Information:
This kit allows the use of a 215/75-15 tire on a 15x7 wheel with +15mm offset. No trimming is required for this tire and wheel combination. If you don't mind some minor plastic trimming, this kit will allow you to fit a larger 235/75-15 tire.

Installation:
This Suspension Lift Kit can be installed using basic hand tools and does NOT require the use of a strut or spring compressor. Detailed printed instructions are included that provide you with all of the information you will need to install this leveling kit. An alignment will be necessary upon completion.

If you have any questions on this or any other ReadyLift product please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via standard ground service to any address in the 50 United States of America!