SPC 1999-2006 Toyota Tundra Upper Control Arm # 25485
SPC has new Minimum Advertised Price rules that took effect on September 1, 2022. All dealers must now advertise SPC products at a pre-determined price. Please click on the ASK A QUESTION link at the very top left of this page to request your Preferred Customer Discount Code for this item.
This SPC / Light Racing Upper Control Arm is designed for use on a 1999, 2000, 2001, 2002, 2003, 2004, 2005 or 2006 model year Toyota Tundra that has run out of factory adjustment after a lift or lowering kit has been installed. Built with an OE style ball joint and new SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. The hybrid tubular and forged steel design is tough enough to race... on or off-road. This 25485 kit is designed to remove and replace the factory control arms. This item also fits 2001-2007 Toyota Sequoia models.
| Brand | SPC |
|---|---|
| Manufacturer | SPC |
| Part Number | 25485 |
| MPN | 25485 |
| GTIN | 082642254850 |
| Vehicle Year | 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999 |
| Vehicle Make | Toyota |
| Vehicle Model | Sequoia, Tundra |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | No |
SPC 1999 - 2006 Toyota Tundra Upper Control Arm # 25485 is designed to allow for a major increase in droop travel and a much wider range of alignment options. These Upper Control Arms provide more articulation capability than factory OEM arms. If your stock upper control arms had sufficient travel in the ball joint these SPC arms will not be the limiting factor to suspension travel! The OEM style sealed high-angle ball joint allows for additional droop travel without the squeaks and rattles commonly caused by unsealed Uniball-style arms. The hybrid tubular steel design is tough enough to survive even the harshest usage. These SPC arms can be used in conjunction with the factory alignment cams to maximize clearance in the wheel well.
NEW SpecRide Bushings
Free Moving Pivot Sleeve which eliminates failures caused by high travel suspensions
Noise and vibration control
Ozone, oil and alkaline resistant material
Front Adjustment range: Camber +/-2.00 degrees, Caster 0.0 degree to +4.00 degrees
Installation time: Approximately 1 hour per side
For more information on this or any other Specialty Products Company or Light Racing products please click on the "ask a question" link located at the very top of this page.
This item ships for free via standard Ground Service to any address in the contiguous 48 United States of America!
| Brand | SPC |
|---|---|
| Manufacturer | SPC |
| Part Number | 25485 |
| MPN | 25485 |
| GTIN | 082642254850 |
| Vehicle Year | 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999 |
| Vehicle Make | Toyota |
| Vehicle Model | Sequoia, Tundra |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | No |
