SPC 2004-2021 Nissan Titan Upper Control Arm Kit # 25560

SPC Upper Control Arm Kit # 25560. Fits 2004-2015 and 2017+ model year Nissan Titan trucks. If you own a Titan that is equipped with a suspension lift or leveling kit you may be experiencing Upper Control Arm to coil bucket (frame) contact. SPC designed their upper control arm to provide more clearance between the arm and the frame which helps prevent clunking and clanking. This # 25560 Upper Arm will fit all 2wd and 4x4 models. Additionally, the OEM upper control arm can make contact with the coil bucket (side of the frame) which limits suspension droop travel and can also cause unwanted noise and clunking. These SPC Upper Control Arms provide additional frame side clearance and feature heavy duty Forged Steel construction and use patented adjustable ball joints. And the new SpecRide(tm) bushings provide long life and quiet trouble-free operation.

NOT FOR USE ON TITAN XD MODELS!

The SPC Adjustable UCA (Upper Control Arm) design and materials allow for an increase in suspension droop or rebound travel and a much wider range of alignment options. These Upper Control Arms have approximately 20* more articulation capability than factory OEM arms. 85* degrees for SPC Upper Arm vs. 65* degrees for the stock ball joint. If your stock factory Nissan control arms had sufficient travel in the ball joint these SPC arms will not be the limiting factor to suspension travel! SPC Upper Control Arms are designed to clear the coil bucket on most Nissan vehicles. Minor grinding on the frame may be necessary on certain vehicles that have a very large flange / lip on the strut mounting pocket. The material necessary for removal is minor and the flange is not structural.

Features:
NEW SpecRide Bushings
Free Moving Pivot Sleeve which eliminates failures caused by high travel suspensions
Noise and vibration control
Ozone, oil and alkaline resistant material
Front Adjustment range: Camber +/-3.00 degrees, Caster -1.0 degree to +3.00 degrees
Installation time: Approximately 1 hour per side

Installation Tech Tip:
The SPC Upper Control Arm is best used to make coarse adjustments to the Camber and Caster. In order to make fine tuning your alignment a much easier process we highly recommend the purchase and installation of the SPC Alignment Cam & Bolt Kit # 87520 (purchased separately). The SPC Alignment Cam & Bolt Kit allows you to much more easily fine tune the camber and caster on your vehicle without having to adjust the Upper Control Arm. Most Nissan trucks and SUV's sold from 2004 through the 2006 model years come factory equipped with an adjustable cam and bolt system. The 2007 and newer vehicles do NOT have an adjustable system installed from the factory. By installing the aftermarket SPC Alignment Cam & Bolt Kit you also make future alignments much easier as the upper control arm should not need to be adjusted. The $49.00 price includes a set of 4 SPC Alignment Cams, Bolts and hardware. These are installed in the lower control arm.

NOT FOR USE ON TITAN "XD" MODELS!

For more information on this or any other Specialty Products Company product please click on the Ask A Question link located at the very top of this page.

This item ships for free via standard ground service to any address in the 48 United States of America!