SPC Upper Control Arm Fits 2005+ Frontier # 25540

SPC Upper Control Arm Kit # 25540. Fits 2005-2021 model year Nissan Frontier 2wd and 4x4 pickup trucks. If you own a 2nd Generation 2005 - 2021 Frontier or a 3rd Generation 2022 - 2025 Frontier and have installed a lift or leveling kit you may be experiencing Upper Control Arm to coil bucket (frame) contact. SPC designed their upper control arm to provide more clearance between the arm and the frame which helps prevent clunking and clanking. This # 25540 Upper Arm will fit 2005 - 2021 Frontier and 2022 - 2025 model year trucks.

2021 Updates & Features:

NEW Forged Construction
NEW xAxis Sealed Flex Joint Bushings
Free Moving Pivot Sleeve which eliminates failures caused by high travel suspensions
Noise and vibration control
Ozone, oil and alkaline resistant material
Front Adjustment range: Camber +/-2.00 degrees, Caster -1.0 degree to +3.00 degrees
Installation time: Approximately 1 hour per side

The SPC Adjustable UCA (Upper Control Arm) design and materials allow for an increase in suspension droop or rebound travel and a much wider range of alignment options. These Upper Control Arms have approximately 15* more articulation capability than factory OEM arms. 80* degrees for SPC Upper Arm vs. 65* degrees for the stock ball joint. If your stock factory Nissan control arms had sufficient travel in the ball joint these SPC arms will not be the limiting factor to suspension travel! SPC Upper Control Arms are designed to clear the coil bucket on most Nissan vehicles. Minor grinding on the frame may be necessary on certain vehicles that have a very large flange / lip on the strut mounting pocket. The material necessary for removal is minor and the flange is not structural.

Installation Tech Tip:

The SPC Upper Control Arm is best used to make coarse adjustments to the Camber and Caster. In order to make fine tuning your alignment a much easier process we highly recommend the purchase and installation of the SPC Alignment Cam & Bolt Kit # 87520 (purchased separately). The SPC Alignment Cam & Bolt Kit allows you to much more easily fine tune the camber and caster on your vehicle without having to adjust the Upper Control Arm. Most Nissan trucks and SUV's sold as 2005 or 2006 model years come factory equipped with an adjustable cam and bolt system. The 2007 and newer vehicles do NOT have an adjustable system installed from the factory. By installing the aftermarket SPC Alignment Cam & Bolt Kit you also make future alignments much easier as the upper control arm should not need to be adjusted. The $50.00 price includes a set of 4 SPC Alignment Cams, Bolts and hardware. These are installed in the lower control arm.

For more information on this or any other Specialty Products Company product please click on the Ask a Question link located at the very top of this page.

This item ships for free via standard ground service to any address in the 50 United States of America!