BDS 2019+ Silverado & Sierra 1500 4x4 6" Lift Kit # 746H

BDS 6" Suspension Lift System # 746H is designed for use on 2019 and 2020 model year Chevrolet Silverado 1500 and GMC Sierra 1500 trucks built on the 4x4 chassis. At the heart of this BDS 6" IFS system are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility while also allowing a wider range of wheel fitment options to include factory 20" wheels. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to mount onto the factory strut assemblies. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Also supplied are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength. In the rear lift blocks and longer u-bolts lift and level the stance and your choice of NX2 gas or FOX 2.0 performance series gas shocks are supplied to round out this kit allowing room for 35-37" tires to be installed.

THIS LIFT INCLUDES NX2 SERIES REAR SHOCKS
 
Vehicle Fitment - Important - Please Read!
This lift is only for use on the standard package equipped Chevrolet Silverado and GMC Sierra 1500 4x4 trucks. This lift is NOT for use on Trail Boss or AT4 edition trucks.

Tire & Wheel Fitment:
This BDS lift kit requires the use of 20" or larger diameter wheels. This lift has been designed to provide enough clearance for 35" x 12.50" tires on a 20x9 wheel with up to 5.50" inches of back space. Please note that installation of larger or wider than recommended tire sizes (or wider than stock wheels) may require trimming. BDS designed this lift to allow the use of the factory 20" wheels. This is one of the few 6" lifts that allows the reuse of the factory 20" wheels.

Important Kit Notes
1. Requires frame bracket modification
2. Will not fit MagneRide / Adaptive Ride equipped models
3. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
4. 17" Wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
5. All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition.
6. Will NOT work with TrailBoss or AT4 models.
7. Will NOT work with 2019 1500 Classic models.
8. Front skid plate will not work with 2.7L Turbo Engines.

For more information please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via standard ground service to any address in the 48 United States of America!