CST 2003-2008 Dodge Ram 1500 Mega Cab 6" Lift # CSK-D13-1

CST Performance Suspension 6" Lift System # CSK-D13-1. This 6" Lift is designed specifically for the 2003, 2004, 2005, 2006, 2007 and 2008 model year Ram 1500 MegaCab 2wd trucks. Will not fit any 4x4 models! This heart of this 6" lift system is the CST lift spindle. The CST parts are MUCH stronger than the factory part it replaces. CST Performance Suspension products are not cheap but you do get what you pay for! If you want cheap go somewhere else... if the price is too high all we can say is keep saving your pennies, this product is worth it. This is one of the few products that we can honestly say will outlast the rest of your truck. With this CST 6" Lift installed you will have room for up to 35" tires (may require some trimming) on aftermarket wheels.

This CST 6" Suspension Lift System will provide a true 6" inches of front suspension lift and 3" inches of rear suspension lift. The front is lifted more than the back to help LEVEL the truck front to rear. These Ram trucks sit very low in the front and by raising the front more than the rear CST is able to achieve a level front to rear stance. The heart of the lift is the CST 3.5" Lift Spindle. Additional lift is provided by a CST 2.5" Lift Coil Spring Spacer that in total provides 6" of front suspension lift. With this amount of lift you can safely run up to a 35" diameter tire.

CST # CSK-D13-1 Includes:
3.5" Lift Spindles
Extended Front Brake Hose
2.5" Lift Urethane Coil Spring Spacer
3" Fabricated Rear Block
Extended Length U-Bolts & Hardware Kit
Detailed Installation Instructions

Important Information!
This CST 2003-2008 Mega Cab 2wd 6" lift requires an extended length Rear Shock Absorber. You can purchase the correct Rear Shock Absorber for use with this CST Lift by using the selection box located above this item description. This lift is for use on 2003-2008 Dodge Ram 1500 Mega Cab 2wd trucks only! This will NOT fit any 4x4 model or regular 1/2 ton Standard cab or Quad Cab models! MEGA CAB 1500 ONLY! The CST 3.5" Lift Spindles used in this lift system require the use of aftermarket wheels. The factory Dodge Ram wheels have too much back space and factory wheels will not clear the CST Spindle. If you ABSOLUTELY must reuse your factory Dodge wheels you can run a 1.250" wheel adapter / spacer. CST recommends the use of an aftermarket wheel with no more than 5.00" inches of back space. The tires on the truck in the picture is a 325/65/18. It measures out to just under 35" inches in diameter and about 13" inches wide. On an 8" or 9" wide wheel this tire clears ok, so our advice is DO NOT RUN a wheel that's wider than 9" inches. That means avoid 10" or wider wheels if you can! Stick with a slightly narrower wheel and your tires will be less likely to rub.

If you have any questions please let us know. Simply click on the "ASK A QUESTION" link located at the very top of this page.

This item ships for FREE via ground service to any address in the 48 United States of America! Customers in Hawaii, Alaska, Canada, please call or send us an e-mail first so that we can provide a shipping quote.