CST 2003-2008 Dodge Ram 2500 & 3500 6.5" Lift # CSK-D11-2

This CST Performance Suspension 6.5" Lift Kit is designed for use on 2003, 2004, 2005, 2006, 2007 and 2008 model year Dodge Ram 2500 2wd and Dodge Ram 3500 2wd trucks. It can also be installed on 1500 Series MegaCab trucks equipped with 8-lug wheels. This lift provides a true 6.5" inches of front suspension lift and 3" or 4" inches in the back. The front is lifted more than the back to help LEVEL the truck front to rear. These trucks sit very low in the front and by raising the front more than the rear we can achieve a more level stance.

The heart of the lift is the CST 3.5" Lift Spindle. Additional lift is provided by a 3" Lift coil spring spacer that in total provides 6.5" of lift. With this amount of lift you can safely run up to a 35" diameter tire. This lift is 100% compatible with all Dodge Ram engines, including the 5.7L Hemi V8 gas motor, the 5.9L and 6.7L Cummins diesel, Standard Cab, Quad Cab and Mega Cab models. Short bed, long bed, this kit fits all 2003-2008 2wd Ram 1500 MegaCab, 2500 and 3500 series trucks

Features & Benefits:
The CST lift spindle provides an honest 3.5" inches of lift and is built by CST to be stronger than the factory part it replaces. CST products are not cheap and you get what you pay for. If you want cheap CST is not the brand for you... if the price is too high all we can say is keep saving your pennies because, this product is worth every last cent. This is one of the few products that we can honestly say will outlast the rest of the truck.

Item Includes:
CST 3.5" Lift Spindles
CST Extended Front Brake Hoses
CST 3" Coil Spring Spacer
CST 3" Fabricated Rear Block
CST U-Bolt & Hardware Kit
Detailed Installation Instructions

PAY ATTENTION TO THIS!
Shock absorbers are NOT included with this kit! Shock absorbers can be purchased separately using the selection boxes located above this item description. This CST 2003-2008 6.5" lift is for use on 2wd Ram 1500 Mega Cab, Ram 2500 and Ram 3500 trucks only! This will NOT fit any 4x4 model or 1500 1/2 series Ram. The CST 3.5" Lift Spindles used in this lift system require the use of aftermarket wheels. The stock Ram wheel back space is too great and the taller spindle neck won't clear a factory wheel. If you ABSOLUTELY must run the factory wheels the use of 1.250" thick wheel spacers will allow this. We recommend an aftermarket wheel with no more than 5.00" inches of back space. On an 8" or 9" wide wheel this tire clears ok, so our advice is DO NOT RUN a wheel that's wider than 9" inches if at all possible. Use of an 8" or 9" wide wheel with the correct back space will allow you to run a larger tire without having to trim the inner fenders to prevent rubbing.

If you have any questions about his or any other CST product please click on the "ASK A QUESTION" link located at the very top of this page

This item ships for FREE via ground service to any address in the 48 United States of America!