CST 2011-2016 Silverado & Sierra HD Front Driveshaft # CSP-C28-5

CST Performance Suspension High Angle CV Style Front Driveshaft # CSP-C28-5. Designed for use on 2011, 2012, 2013, 2014, 2015 and 2016 Chevrolet Silverado and GMC Sierra HD series trucks equipped with a drop subframe style suspension lift system and the Duramax / Allison. If your 2500HD or 3500 series truck is running a CST Performance Suspension 8 to 10" lift kit and you are experiencing front driveline vibrations or noise when operating your truck in 4x4 mode this may be the solution you need. The drive shaft features a Dual Universal Joint Cage (aka Dual Cardan) at the transfer case side that effectively doubles the angular capacity at which the driveshaft can operate at. This increase in allowable operating angle allows the driveshaft to operate at steeper angles without binding. When you eliminate the bind you also eliminate the vibrations.

PLEASE READ THIS!
Starting sometime in the 2017 model year trucks GM made revisions to the front driveshaft. This item will NOT fit the 2017 or newer trucks with the revised front driveshaft.

Installation of the CST # CSP-C28-5 Replacement Front Driveshaft will also require the installation of CST part # CSS-C22-8 or CSS-C22-13 Low Profile Shift Linkage Bracket Kit. Failure to install the correct CST Shift Linkage Bracket kit on your truck can allow the CSP-C28-5 driveshaft to literally rip the factory shift linkage right off the truck causing major damage. The reason for this is because the CST Dual Cardan style driveshaft has a larger outside diameter at the transfer case side than the factory GM driveshaft does. The CST Shift Linkage Bracket kit can be purchased using the selection box located above this item description.

For more information on this or any other CST Performance Suspension product please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via standard ground service to all addresses located in the lower 48 United States of America!