CST 2013 - 2018 Ram 1500 2wd 5.5" Lift - Stage 3 # CSK-D5-3

CST Performance Suspension 2013 - 2018 Ram 1500 2wd Stage 3 Suspension Lift System # CSK-D5-3. This lift has been installed, tested, and successfully held an alignment on the 2013 through 2018 model year Ram 1500 2wd trucks with no installation or alignment issues typically found in some other lesser quality kits now on the market. Customers are also pleasantly surprised when they learn the truck rides as nice as it looks! This kit does replace the coil springs but still provides a very smooth and comfortable highway and freeway ride. This lift system is designed specifically for 2013, 2014, 2015, 2016, 2017 and 2018 Ram 1500 2wd trucks equipped with the 3.7L V6, 4.7L or 5.7L Hemi V8 gas or 3.0L EcoDiesel engine options. Also fits 2019 - 2023 Ram 1500 Classic DS 4th Gen trucks. Will NOT fit 2019+ Gen 5 DT models!

17" & 18" Wheel Information:

This kit will not work with factory 17" diameter wheels unless wheel spacers are installed. Wheel back space must not exceed 5.00" inches when running 17" or 18" diameter wheels or tire sidewall to suspension component clearance issues may occur! CST recommends the use of 8" or 9" wide wheels to ensure sufficient front tire to inner fender clearance when turning. Use of wheels 10" inches or wider will in most cases cause rubbing issues when the front tires are turned.

20" Diameter Wheel Information:

PerformanceLifts.com has a number of Ram 1500 2wd owners successfully running the factory 20" wheels with this CST lift. When running the factory Dodge 20" wheel the tire width must not exceed 12" inches or a 305 series. If you want to use your factory 20" wheels and run a tire wider than 12.00" inches a wheel spacer will most likely be required. When running aftermarket 20" or larger diameter wheels the back space should not exceed 5.50" inches.

Front Shock Absorbers:

CST does not include front shock absorbers with this Stage 3 suspension lift system. Use of the correct length front shock will dramatically improve the ride and handling of this suspension system. CST offers their 2.0 Dirt Series Emulsion front shock absorbers that can be purchased using the selection boxes located above this item description. We also offer a less expensive Bilstein 5100 series option that has the correct length to work with this CST lift.

Rear Shock Absorbers:

This lift package includes a pair of CST 2.0 Dirt Series Series shock absorbers designed specifically for use with this CST lift system.

Tire Size Information:

This lift will allow the use of 35" tires without trimming when installed on 8" to 10" wide wheels. Use of wheels wider than 10" may cause tire scrubbing when turning.

Additional Information:

A question we are commonly asked is why is the front lifted more that the rear? By lifting the front more than the rear CST is able to level the stance of these trucks. The 2013+ Ram 1500 2wd trucks commonly sit 2.5" to 3" inches lower in the front than the rear. This kit does not require any cutting or welding to install. The truck can be reverted back to stock height if the need arises (leased vehicles, trade-in, etc).

If you have any additional questions about this or any other CST Performance Suspension product please click on the Ask A Question link located at the very top of this page.

This item ships for FREE via standard ground service to any address in the 48 United States of America!