CST 2019+ Ram 1500 2wd 4" Lift Spindle # CSS-D1-6
This CST 4" Fabricated Lift Spindle is designed to fit the updated 2019 - 2023 Ram 1500 2wd trucks. It will fit all known engine and transmission combinations, including the Eco-Diesel equipped trucks. It is however not for use on factory Air Ride equipped models. These CST 4" Lift Spindles are Made in the USA and will allow the use of larger than stock tires! This CSS-D1-6 lift spindle will provide 4" inches of front suspension lift height and an additional 4" inches of ground clearance. Keep reading below for more product information...
Brand | CST Performance Suspension |
---|---|
Manufacturer | CST Performance Suspension |
Part Number | CSS-D1-6 |
MPN | CSS-D1-6 |
Vehicle Year | 2023, 2022, 2021, 2020, 2019 |
Vehicle Make | RAM |
Vehicle Model | Ram 1500 |
Drive Type | 2-Wheel Drive |
Made In USA | Yes |
This CST 4" Lift Spindle # CSS-D1-6 is designed to fit 2019, 2020, 2021, 2022 and 2023 Ram 1500 2wd model year trucks built on the standard suspension. This spindle will not fit air suspension equipped models. Will not fit any truck factory equipped with 22" wheels. CST Fabricated Lift Spindles have been available for older Ram 1500 2wd trucks for over a decade and they haven proven to be extremely reliable for on and off-road use. CST Performance Suspension engineers have been modifying and refining their spindles over the years and currently offer without a doubt the finest 4" Fabricated spindle currently available for the 2019+ Ram 1500 2wd pickup trucks.
The CSS-D1-6 spindles will lift the front of the Ram 1500 2wd an honest 4 inches and maintains the smooth stock ride! The CST 4" Lift Spindles are stronger than the stock pieces they replace. Another benefit is lift spindles also increase ground clearance under the front cross member by a full four inches. These CST Lift Spindles provide clearance for larger than stock tires and give your 2wd Ram more ground clearance than most lifted Ram 1500 4x4s!
Ordering Information
The CSS-D1-6 part number by itself includes one pair of CST 4" Lift Fabricated Spindles and basic installation hardware. Extended front brake hoses are required when installing this spindle. Extended Front Brake Hoses are not included with the CSS-D1-6 part number. A Rear Suspension Lift is also not included. These options can be purchased via this page using the selection boxes located near the Add to Cart button.Tire and Wheel Info:
The first question most customers ask us if this spindle is compatible with factory wheels. The answer is factory 17" wheels WILL NOT FIT. Use of the factory Ram 20" wheels will work but the tire width must not exceed 12.00" inches or 305mm. If running aftermarket 17" or 18" diameter wheels we recommend the wheel have no more than 4.75" inches of back space. When running aftermarket 20" or larger diameter wheels we recommend the wheel have no more than 5.25" inches of back space.Additional Tire Size Information:
Installation of larger than recommended tire sizes (or wider than stock wheels) will most likely require trimming.If you don't see a lift combination that suits your needs please contact us and we'll put together a custom lift package for you!
For more information, please click on the Ask a Question link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 United States of America!
Brand | CST Performance Suspension |
---|---|
Manufacturer | CST Performance Suspension |
Part Number | CSS-D1-6 |
MPN | CSS-D1-6 |
Vehicle Year | 2023, 2022, 2021, 2020, 2019 |
Vehicle Make | RAM |
Vehicle Model | Ram 1500 |
Drive Type | 2-Wheel Drive |
Made In USA | Yes |