CST 2019+ Ram 1500 2wd 4" Lift Kit # CSK-D19-1
This CST Stage 1 Lift includes a pair of CST 4" Lift Spindle that are designed to fit the revised 2019 and newer 5th Generation Ram 1500 2wd trucks. It will fit all known engine and transmission combinations, including the Eco-Diesel equipped trucks. It is however not for use on factory Air Ride equipped models. These CST 4" Lift Spindles are Made in the USA and will allow the use of larger than stock tires! This CSK-D19-1 lift kit will provide 4" inches of front and 1.5" inches of rear suspension lift height which provides room for larger than stock size tires. Keep reading below for more information...
Brand | CST Performance Suspension |
---|---|
Manufacturer | CST Performance Suspension |
Part Number | CSK-D19-1 |
MPN | CSK-D19-1 |
Vehicle Year | 2024, 2023, 2022, 2021, 2020, 2019 |
Vehicle Make | RAM |
Vehicle Model | Ram 1500 |
Drive Type | 2-Wheel Drive |
Made In USA | Yes |
This CST Stage 1 Lift System Spindle # CSK-D19-1 will provide 4" inches of front lift and 1.50" inches of rear lift. This kit is designed to fit the revised 5th Generation 2019, 2020, 2021, 2022, 2023 and 2024 model year Ram 1500 2wd model year trucks. Please note, this item will NOT fit on any Classic Edition Ram 1500 models. Sorry Air Ride suspension owners, this system is not designed for use on factory Air Suspension equipped models. CST 4" Lift Spindles have been available for earlier Ram 1500 2wd trucks for over a decade and they haven proven to be extremely reliable for on and off-road use. CST Performance Suspension engineers have been modifying and refining their spindles over the years and currently offer without a doubt the finest 4" Fabricated spindle currently available for the 2019+ Ram 1500 2wd pickup trucks.
The included CSS-D1-8 spindles will lift the front of the Ram 1500 2wd an honest 4 inches and maintains the smooth stock ride! The CST 4" Lift Spindles are stronger than the stock pieces they replace. Another benefit is lift spindles also increase ground clearance under the front cross member by a full four inches. These CST Lift Spindles provide clearance for larger than stock tires and give your 2wd Ram more ground clearance than most lifted Ram 1500 4x4s!
Ordering Information
The CSK-D19-1 part number includes one pair of CST 4" Lift Spindles, Extended length braided stainless steel front brake hoses, 1.50" lift rear coil spring spacers and all necessary installation hardware.
Tire & Wheel Info:
The CST 4" lift spindles are compatible with factory Ram 20" wheels and stock or aftermarket tires not to exceed 12.00" inches or 305mm in width. If you want to run aftermarket 20" wheels and larger tires we recommend that the wheel have no more than 5.25" inches of back space. Unfortunately factory 17" wheels will NOT fit properly unless wheel spacers are installed (not included). When running aftermarket 17" wheels we recommend the wheel have no more than 4.75" inches of back space. This lift is NOT compatible on trucks factory equipped with 22" wheels!
NOT FOR USE ON TRUCKS FACTORY EQUIPPED WITH 22" WHEELS!
If you don't see a lift combination that suits your needs please contact us and we'll put together a custom lift package for you!
For more information, please click on the Ask A Question link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 United States of America!
Brand | CST Performance Suspension |
---|---|
Manufacturer | CST Performance Suspension |
Part Number | CSK-D19-1 |
MPN | CSK-D19-1 |
Vehicle Year | 2024, 2023, 2022, 2021, 2020, 2019 |
Vehicle Make | RAM |
Vehicle Model | Ram 1500 |
Drive Type | 2-Wheel Drive |
Made In USA | Yes |