CST 2019+ Ram 1500 2wd 6.0" Lift Kit # PLC-D19-6RWD

This Suspension Lift System # PLC-D19-6RWD will provide 6.0" inches of front lift and 4" inches of rear lift. This lift kit is designed to fit 2019, 2020 and 2021 model year Ram 1500 2wd model year trucks built on the standard non-air ride suspension. This lift features CST Performance Suspension high clearance 4" lift spindles and to keep the cost as low as possible it includes 2" lift spacers designed to retain the factory front shock and spring assembly. Extended length braided stainless steel front brake hoses are included to ensure safe brake operation and improved pedal feel over the factory rubber lines. The rear is lifted using steel spring spacers that retain the factory rear coil springs and to ensure proper rear axle housing alignment a welded steel Track Bar Drop Bracket is included. High strength installation hardware and printed installation instructions are also included.

Vehicle Fitment - Important - Please Read!
This lift will cannot be installed on any truck equipped with factory Air Ride. This lift is not for use on 4-Wheel Drive models. Because of design changes this lift does not fit any 4th Generation Ram 1500. That means this lift will NOT fit any Classic Edition Ram (previous generation) trucks. Unfortunately due to changes Ram has made to the 2019+ Ram 1500 trucks this lift is not compatible with trucks factory equipped with 22" wheels. This is because Ram uses a different wheel hub on trucks factory equipped with 22" wheels and those hubs are not compatible with the CST 4" lift spindles.

Tire & Wheel Fitment
With this new CST 6.0" kit you must run a 17" or larger diameter wheel. When running 17" wheels CST recommends no more than 4.75" of back spacing. Larger diameter wheels (20" and above) can run wheels with up to 5.00 inches of back space. Please note that installation of larger or wider than recommended tire sizes (or wider than stock wheels) may require trimming.

Shock Absorber Information
This lift allows you to retain the factory front shock and spring assembly. That means you do not need to purchase new front shocks when installing this lift. The front coilover shocks that we offer for use with this lift are an optional upgrade. The ICON coilover can provide up to 2.5" inches of lift which takes the combined lift height up to 6.5" inches over stock. The rear shocks however must be replaced as the factory stock length shocks are too short. We currently offer a number of rear shock options designed specifically for use with the 4" rear lift that this lift kit includes. Front and Rear shocks are NOT included but can be purchased as an option using the selection box located near the Add To Cart button.

For more information, please click on the "Ask A Question" link located at the very top of this page.

This item ships for FREE via standard ground service to any address in the 48 United States of America!