CST 2019+ Ram 1500 4wd Air Ride 6.5" Lift - Stage 1 # CSK-D18-1

CST Performance Suspension Stage 1 Lift System # CSK-D18-1 will provide 6.5" inches of front lift and 4" inches of rear lift. This Stage 1 Kit is designed to fit 2019 and 2020 Ram 1500 4wd model year trucks built on the factory AIR RIDE suspension. This lift features high clearance welded steel sub frames and fabricated steel steering uprights (knuckles) to provide you with enough strength to tackle on and off-road driving. To retain the factory air ride system CST includes all necessary front and rear spacers designed to retain the factory Air Ride system. To protect the front differential CST includes a skid plate designed to fend off most trail obstacles. Extended length braided stainless steel front brake hoses ensure safe brake operation and improved pedal feel over the factory rubber lines. The rear is lifted using steel spacers and to ensure proper rear axle housing alignment a welded steel Track Bar Drop Bracket is included. High strength installation hardware and printed installation instructions are also included.

CST STAGE 1 KIT # CSK-D18-1 Kit Features:
Retains Factory Track Width
Retains Factory Tow Capitacy
Retains Factory Air Ride Suspension
Compatiable with Factory Stability Control
Fits 18" or Larger Wheel
Max Back Spacing 5"
Clears 35" Tire with No Trimming
Clears 37" Tire with Minor Trimming

Stage 1 Kit Information:
The CST Stage 1 kit does not include rear shock absorbers. Extended length rear shock absorbers are necessary to complete the installation. If you want to add CST 2.0 Dirt Series Emulsion shock absorbers we do offer them as an optional upgrade available for purchase using the selection box located near the Add to Cart button on this product page.

Stage 1 Kit Contents:
CSS-D3-1-B1 = FRONT AND REAR SUBFRAME DROPS
CSS-D3-1-B2 = STEERING UPRIGHTS (KNUCKLES)
CSS-D3-1-B3 = SWAY BAR DROPS, HARDWARE, BRACKETS
CSS-D16-8 = AIR RIDE AUTO LEVEL SYSTEM

Vehicle Fitment - Important - Please Read!
This lift is specifically designed only for use on Factory Air Ride equipped trucks. This lift is not for use on 2-Wheel Drive models. Because of design changes this lift does not fit the 2019 Classic Edition Ram (old body style) trucks. Unfortunately due to changes Ram has made to the 2019+ Ram 1500 trucks factory equipped with 22" wheels this lift will NOT fit. This is because RAM trucks with 22" factory wheels use a different wheel hub than on trucks factory equipped with 20" or smaller diameter wheels. Unfortunately the hubs used on the 22" wheel equipped trucks are not compatible with the CST fabricated steering uprights.

Tire & Wheel Fitment:
With this new CST 6.5" kit you must run an 18" or larger wheel with no more than 5" of back spacing. CST states that tires up to 37" inches in diameter can be run with this lift. Please note that installation of larger or wider than recommended tire sizes (or wider than stock wheels) may require trimming.

For more information, please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via standard ground service to any address in the 48 United States of America!