Pro Comp 2011 - 2019 Chevrolet & GMC 2500HD & 3500 6" Lift

This Pro Comp Suspension 6" Lift is designed to fit 2011 - 2019 model year Silverado & Sierra 2500HD, 3500 single and Dual rear wheel trucks (select vehicle type before completing checkout). This kit is relatively easy to install and Pro Comp went to great lengths to build a kit that doesn't require drilling. Anywhere they could the factory holes were used. When additional holes were needed, Pro Comp devised interlocking features to obtain satisfactory mounting while easing installation. To make DIY installation possible NO welding is required. The new HD comes with additional mounting points for the rear cross member, allowing ProComp to design a lift that does not require a welded in support plate. One Cut... There is only one vertical cut required to the driver side differential frame horn.

Largest rear cross member ever... At first glance the 2011 - 2019 HD looks like any other previous generation GM heavy duty truck. However with further inspection, ProComp found that this is the largest HD that Chevrolet has ever produced. This calls for the largest cross member that ProComp has ever made. At over four feet long, and over 50 lbs, this cross member is ready for the toughest tasks. Overkill u-bolts... GM supplied the new HD with 18mm u-bolts, ProComp did one better, and increased their u-bolts size to 3/4" inch.

A place for everything... Detailed thought goes into everything that needs to be re-located. Even the smallest detail like brake line tabs and ABS clips get a new home, so you can trust your new K1087M lift will not compromise safety.

Wider is better... When raising a vehicle 6" the truck becomes top heavy from raising the center of gravity and the CG is directly related to the Stabilitrak system. By widening the vehicle 3/4" per side, ProComp can maintain the factory king pin inclination, which helps stabilize the truck and work with the Stabilitrak, not against it. In addition to working with the Stabilitrak, no additional tire scrub is added.

Factory 20" wheels can be used with this suspension lift.

Fitment Information:

The only difference between the 2500HD, 3500 SRW and 3500 DRW fitment is the rear U-Bolt length. This kit will fit 2011 - 2019 Chevrolet Silverado 2500HD and 3500 series trucks but you must be certain to select the correct vehicle type before completing the checkout process.

THIS KIT DOES NOT INCLUDE SHOCK ABSORBERS!

For more information on this or any other Explorer Pro Comp product, please click on the Ask a Question link located at the very top of this page.