Fabtech 1988-1991 C1500 Standard Cab 4" Spindle Lift # FTS1588-7BC
February 2021 - DISCONTINUED BY FABTECH - OUT OF PRODUCT / NO LONGER AVAILABLE FOR PURCHASE
General Motors venerable C1500 full-size truck is a stylish and rugged performer, heavily supported by the aftermarket, which means there are lots of goodies available to trick-out these haulers. For the C1500 light duty 2WD trucks, Fabtech designed a vast range of systems from their spindle system to the Ultimate long travel system. This Fabtech FTS1588-7BC 4" lift spindle design provides the simplest installation with the least amount of control arm modifications. This 4" spindle kit is a terrific choice for all-around performance and for those looking to gain height without sacrificing ride quality. By retaining the stock coilsprings, the ride will remain very similar to stock. The Fabtech FTS1588-7BC lift spindles are designed to fit the 1988, 1989, 1990 and 1991 C1500 standard cab 5-lug trucks. This item will NOT fit any other model year or ANY extended cab models. Will NOT fit 454 SS models. Again, this spindle is for use on standard cab models built between 1988 and 1991 only (non-454SS)!
Keep reading below for more details...
| Manufacturer | Fabtech Motorsports |
|---|---|
| Part Number | FTS1588-7BC |
| Vehicle Year | 1991, 1990, 1989, 1988 |
| Vehicle Make | Chevrolet, GMC |
| Vehicle Model | Sierra 1500, Silverado 1500 |
| Drive Type | 2-Wheel Drive |
| Made In USA | Yes |
The Fabtech FTS1588-7BC is designed for installation on 1988, 1989, 1990 and 1991 model year Standard Cab C1500 2wd trucks. These Fabtech Lift Spindles provide a full 4" of Front Suspension Lift and also increases ground clearance by four inches over stock! To level the vehicle PerformanceLifts.com suggests a 2" or 3" block be used. For those looking to give their Silverado or Sierra the "prerunner" look a shorter 1" block is also available. This is one of the best lift kit options available for the earlier C1500 trucks. This item will NOT fit any other models or any extended cab trucks.
Fabtech Shock Absorbers and Rear Lift Block and U-Bolt Kit are NOT included with the FTS1588-7BC Spindles. All of these items are available separately using the selection boxes located above this item description. The shocks, blocks, and u-bolts shown in the item picture are NOT included in the base price and must be purchased separately.
Wider than stock tires cannot be installed on OEM wheels as they will rub the top of the spindle. Aftermarket wheels with a maximum back space of 3.75" are recommended. Maximum tire size suggested for use with this 4" lift spindle is a 32x11.5R15 on a 15x8" wheel. Larger diameter wheels (16" - 17" - 18" - 20" etc) can also be used but the back space requirement is still important. Please contact us if you have a question regarding wheel fitment before ordering.
For more information please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 United States of America! Alaska, Hawaii, and International customers must contact PerformanceLifts.com to receive a shipping quote before placing an order.
| Manufacturer | Fabtech Motorsports |
|---|---|
| Part Number | FTS1588-7BC |
| Vehicle Year | 1991, 1990, 1989, 1988 |
| Vehicle Make | Chevrolet, GMC |
| Vehicle Model | Sierra 1500, Silverado 1500 |
| Drive Type | 2-Wheel Drive |
| Made In USA | Yes |
