Fabtech 2009-2013 Ford F150 4WD 6" Performance System # K2115B
Fabtech Motorsport part number K2115B. This Fabtech 6" suspension lift system is designed for use on 2009, 2010, 2011, 2012 and 2013 model year Ford F150 SuperCrew trucks built on the 4wd chassis. And Yes! This lift will also fit 3.5L EcoBoost V6 equipped trucks. Constructed of 1/4" thick steel, Fabtech's signature arched lower control arm crossmembers and integrated differential skid plate provide strength and rigidity to the front frame and suspension. Crossmembers include adjustable eccentric cams for easy front end alignment and ability to hold alignment under offroad conditions. Fabtech's proprietary steering knuckles are built in the USA using the finest American made ductile iron and will allow the use of aftermarket 18" or 20" diameter wheels. Keep reading below for more details...
Manufacturer | Fabtech Motorsports |
---|---|
Part Number | K2115B |
Vehicle Year | 2013, 2012, 2011, 2010, 2009 |
Vehicle Make | Ford |
Vehicle Model | F150 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
This Fabtech 6" Suspension Lift System # K2115B includes a set of Dirt Logic 2.5 Coilover front shocks that provide outstanding front suspension control for both on and off-road use. The Performance Series shocks included with this lift are a low priced entry level shock. This package is designed for somebody that wants the adjustable front lift height the Dirt Logic Coilovers can provide without spending a ton of money on Dirt Logic rear shocks. The recommended tire size is up to 35" inches in diameter and up to 13.50" inches wide. Minor trimming may be required when running the maximum recommended tire size. This lift system will not allow the use of factory Ford wheels. Fabtech recommends an aftermarket 18x9 or 20x9 wheel that has no more than 5.00" inches of back space.
Fabtech also includes sway bar brackets, impact struts, a 5" rear block with a built in bumpstop pad, and an extended length U-bolt kit. Fabtech offers two 6" lift systems, this is the K2115B Performance System and it includes a pair of Dirt Logic 2.50 Front Coilover Shocks and a pair of standard "white can" Fabtech rear shock absorbers. As an option we offer a Dirt Logic 2.25" Non-Reservoir Rear Shock for use with this lift if additional on and off-road performance is desired
Installation Notes:
Professional installation is recommended. Fabtech estimates this kit will require approximately 5 hours of labor to install. This installation time assumes the installer is a professional mechanic with access to all necessary tools. No drilling is required. No welding is required. There are no driveshaft modifications required.
If you have questions on this or any other Fabtech product, please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 48 contiguous United States of America!
Manufacturer | Fabtech Motorsports |
---|---|
Part Number | K2115B |
Vehicle Year | 2013, 2012, 2011, 2010, 2009 |
Vehicle Make | Ford |
Vehicle Model | F150 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |