Fabtech 2010-2014 Ford Raptor 4" Lift Kit # K2186
Out of stock until Summer of 2024
This Fabtech Ford Raptor 4" Suspension Lift System # K2186 features heavy duty ductile iron steering knuckles designed to handle 37″ tall tires with the vehicle’s ESC (electronic stability control) and Traction Control. Typically 37″ tires will cause steering and brake issues on the factory Ford steering knuckles. Fabtech knuckles are designed for oversized tires and will provide trouble free service on and off-road. The Ford Raptor SVT control arms are relocated using 1/4″ thick steel Crossmembers that retain the suspension travel features that make this vehicle so popular for offroad use.
Keep reading below for more product details...
Brand | Fabtech Motorsports |
---|---|
Manufacturer | Fabtech Motorsports |
Part Number | K2186 |
MPN | K2186 |
GTIN | 674866087354 |
Vehicle Year | 2014, 2013, 2012, 2011, 2010 |
Vehicle Make | Ford |
Vehicle Model | F150 Raptor |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
Fabtech Motorsports 4" Lift Kit # K2186 fits 2010, 2011, 2012, 2013 and select 2014 model year Ford SVT Raptor trucks. Fabtech designed this 4" lift to allow the use of up to 37" tires without killing the on and off-road suspension performance the Raptor is known for. Fabtech drops the front differential down to make sure the front CV angles are kept flat to ensure maximum strength and reliability from the front driveline. To shield the front differential Fabtech includes a 1/4″ thick steel skid plate for protection.The factory FOX Racing Shox are retained using super stout front and rear shock extensions. If you have installed aftermarket shocks this lift will most likely not fit properly or the shock relocation hardware will require modification.
Features & Benefits:
Retains factory track width keeping tires under fenders
ESC and Traction Control compliant with 37″ tall tires
Retains Fox Shox for a factory Raptor ride
High arched Crossmembers utilize Ford SVT control arms
Front diff drop brackets retain proper CV angles
Installation & Tech:
Estimated installation time is approximately 3 to 4 hours. Welding is not required. No Driveshaft modifications are required. This lift is designed to clear a 37" tire without having to increase the spring preload on your Fox coilovers. This means you can increase the tire size without losing droop or rebound travel at ride height caused by increasing the preload too much on the springs. If you want to run 37" tires but don't want to mess with the awesome ride and handling the Raptor is known for this Fabtech K2186 kit is a good solution. Please note however that OEM wheels and tires cannot be used.
K2186 Kit Contents:
FTS22161 - COMPONENT BOX 1 of 2
FTS22162 - COMPONENT BOX 2 of 2
For more information on this or any other Fabtech Motorsports product please click on the "Ask A Question" link located at the very top of this page.
This item ships for FREE via Standard Ground Service to any address in the contiguous 48 United States of America! Alaska, Hawaii, and International customer should contact us before placing an order.
Brand | Fabtech Motorsports |
---|---|
Manufacturer | Fabtech Motorsports |
Part Number | K2186 |
MPN | K2186 |
GTIN | 674866087354 |
Vehicle Year | 2014, 2013, 2012, 2011, 2010 |
Vehicle Make | Ford |
Vehicle Model | F150 Raptor |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |