Fabtech GEN II 2009-2013 Ford F150 4x4 6" Performance Dirt Logic # K2191DL
Manufacturer | Fabtech Motorsports |
---|---|
Part Number | K21910DL |
Vehicle Year | 2013, 2012, 2011, 2010, 2009 |
Vehicle Make | Ford |
Vehicle Model | F150 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
Installation Guide | Click Here to Download Instructions |
Fabtech Motorsports GEN II 2009-2013 Ford F150 6" Lift System # K2191DL. The revised K2191DL lift system includes crossmembers that have adjustable eccentric cams to make for easy front end alignment and the ability to hold an alignment under offroad conditions. Fabtech's proprietary steering knuckles are built in the USA using the finest American made ductile iron and will allow the use of 18" or 20" diameter wheels. Fabtech also includes sway bar brackets, impact struts, a 5" rear block with a built in bumpstop pad, and an extended length U-bolt kit.
Tire & Wheel Fitment:
This Fabtech K2191DL suspension lift is not designed to allow the use of factory Ford wheels. Fabtech recommends an 18x9 or 20x9 wheel that has no more than 5.00" inches of back space. The recommended tire size is up to 35" inches in diameter and up to 13.50" inches wide. Minor trimming may be required when running the maximum recommended tire size.
Use 325/65R18 tires w/ 18x9 wheels w/ 5” BS w/ minor trimming
Use 35/13.50R18 tires w/ 18x9 wheels w/ 5" BS w/ minor trimming
Use 35/13.50R20 tires w/ 20x9 wheels w/ 5” BS w/ minor trimming
Fabtech K2191DL Contents:
1 x FTS22175 - Component Box 1
1 x FTS22173 - Component Box 2
1 x FTS22198 - Dirt Logic 2.5 Reservoir Coilovers
2 x FTS810292 - Rear Dirt Logic 2.25 Non Resi
IMPORTANT FOOTNOTES!
14. Cannot use OEM wheel and tire.
47. Fits SuperCrew models only.
123. Will not fit Raptor models.
Installation Notes:
Professional installation is recommended. Fabtech estimates this kit will require approximately 5 hours of labor to install. This installation time assumes the installer is a professional mechanic with access to all necessary tools. No drilling is required. No welding is required. There are no driveshaft modifications required.
If you have questions on this or any other Fabtech product, please click on the "ask a question" link located at the very top of this page.
Alaska - Hawaii - International customers: Please contact us before placing an order to receive a more accurate (possibly less expensive) freight quote.
This item ships for FREE via standard ground service to any address in the 48 contiguous United States of America!
Manufacturer | Fabtech Motorsports |
---|---|
Part Number | K21910DL |
Vehicle Year | 2013, 2012, 2011, 2010, 2009 |
Vehicle Make | Ford |
Vehicle Model | F150 |
Drive Type | 4-Wheel Drive |
Made In USA | Yes |
Installation Guide | Click Here to Download Instructions |