FOX Racing 2009-2013 Ford F150 4x4 Reservoir Coilover # 880-06-634

These FOX Racing Shox 2.5 Factory Series Reservoir Coilovers # 880-06-634 are designed for use on 2009, 2010, 2011, 2012 and 2013 model year Ford F150 4x4 trucks only. This coilover shock will not fit 2wd models. These FOX coilover shocks are sold as a matched pair. The price listed includes 1 pair of FOX Factory 2.5" Series 880-06-634 Reservoir Coilovers with DSC Adjusters. We also offer FOX Rear Shock Absorbers for use with the 2009 - 2013 F150 4x4 trucks. Please note that rear shocks are NOT included and must be purchased separately.

Each FOX Racing Shox 2.5 Factory Series Coilover features a smooth-bore, clear coated, zinc plated, and honed seamless alloy body. The end caps and mounts are Black anodized 6061-T6 billet aluminum. The shock shaft is 7/8" heat treated alloy steel that is hard chrome plated. The piston design was developed by Fox through years of Racing experience and the valving is vehicle and application specific to maximize on and off-road performance. Fox Racing Shox hold up to daily driver use because of a unique redundant sealing pack system that features the main seal, a wiper seal, and a scraper seal. And because FOX knows their coilovers are used all over the world they use a specially formulated shock oil that is designed to provide consistent performance at variable temperatures, Alaska Winters to Arizona Summers, these shocks can handle both extreme cold and extreme heat.

Ride Height Information:
Out of the box this coilover will provide different lift heights based on the weight of the vehicle. Customers frequently ask HOW MUCH LIFT WILL I GET and the answer is we don't know. Expect approximately 2" inches of lift and then plan on adjusting the ride height to achieve the desired lift height increase for your specific F150. That's part of the benefit of purchasing a high end adjustable coilover... you can adjust the ride height to best suit your needs. Please note that as you increase the ride height you will notice a reduction in ride quality. If your goal is to increase the ride height more than 2" inches we recommend the installation of an aftermarket upper control arm designed to work with the additional lift and prevent ball-joint bind / wear. Going taller than 2" over stock height is possible with these coilovers but the ride quality will suffer as you go up.

For more information on this or any other FOX Racing Shox product please click on the "Ask A Question" link located at the very top of this page.