ICON 2003+ Toyota 4Runner 2" Lift Rear Coil Springs # 52700

ICON 2003+ Toyota 4Runner 2" Lift Rear Coil Springs # 52700. These coil springs are designed for use on 2003 to current Toyota 4Runner vehicles. ICON developed these coil springs to provide approximately 2" inches of lift on an unloaded vehicle. Please keep in mind that if you have installed a heavy aftermarket rear bumper, roof top tent or anything else that's HEAVY the actual lift height over stock will be less than 2" inches. If you have equipped your 4Runner for Overland or Expedition use we recommend the ICON Overland Series # 52800 coil spring, available on a separate product page.

Commonly asked questions...
Customers ask us "exactly how much lift will these springs give me" and the answer is we are unable to tell you exactly how much additional lift these coil springs will provide. The reason being is the lift height you achieve is all based on the weight of the vehicle. If your 4Runner is totally unloaded the expected lift height is approximately 2" inches. We can tell you from experience that if you have installed additional accessories on your 4Runner that added weight the more weight you add the less lift height these springs will provide. Simple right?

Yes, the ICON # 52700 Coil Spring set does have a higher spring rate than the factory Toyota springs. A higher spring rate was selected by ICON to help reduce the body roll and frequent bottoming out problem that the 4Runner exhibits when driven aggressively on or off-road.

For more information on this or any other ICON Vehicle Dynamics product please click on the "Ask A Auestion" link located at the very top of this page.