ReadyLift 2019 - 2024 Sierra 1500 Denali 1.5" Leveling Kit # 66-39151

ReadyLift 1.5" Leveling Kit # 66-39151 is designed for use on the re-designed 2019 through 2024 model year GMC Sierra 1500 Denali trucks equipped with the ARC suspension package. ARC = Adaptive Ride Control. The new GMC Denali edition trucks still arrive with the front end sitting lower than the rear and the front valance is closer to the ground than ever. More and more consumers are discovering that GMC trucks look much better with a lifted and leveled stance. This leveling kit provides approximately 1.50" inches of front suspension lift via CNC-machined aircraft-grade billet Aluminum upper strut spacers and new mounting hardware. For ARC compatibility ReadyLift also includes the ARC specific upper control arm lever arm relocating brackets.

Tire & Wheel Information:

Upgrading to larger tires and wheels on the new 2019-2020 GMC trucks can be somewhat restrictive due to the factory wheel well opening design. However with the ReadyLift # 66-39151 leveling kit installed the Denali trucks can accept a maximum tire size of 33x11.50-20 on a 20x9 wheel with 0 offset. Some minor trimming may be necessary depending on tire tread design.

By raising the front suspension on your Sierra you get the great looks of a level truck and the ability to run a larger than stock tire or wheel size. Most customers are running a tire that is approximately 33" inches in diameter. The combination of the leveling kit height increase and a larger than stock tire diameter will help increase front end ground clearance by up to 2.5" inches over stock! This increase in ground clearance is especially helpful if you need to travel off-road or in deep snow and don't want to "plow" the road with the underside of your truck.

Important Fitment Note:

This ReadyLift # 66-3922 leveling kit was designed specifically for use on 2019 2024 GMC Sierra 1500 Denali trucks equipped with the ARC suspension option. This kit is however compatible with regular Silverado 1500 and Sierra 1500 trucks too. You'll end up with an unused bracket designed for the electronic sensor found on ARC equipped vehicles. This leveling kit is NOT designed for use on Trail Boss or AT4 equipped models.

Installation:

This leveling kit can be installed using basic hand tools and does NOT require the use of a strut or spring compressor. Detailed printed instructions are included that provide you with all of the information you will need to install this leveling kit. An alignment will be necessary upon completion.

If you have any questions on this or any other ReadyLift product please click on the Ask A Question link located at the very top of this page.

This item ships for FREE via standard ground service to any address in the 50 United States of America!