SPC 2004-2020 Ford F150 Forged Upper Control Arm Kit # 25680

SPC Upper Control Arm Kit # 25680. Fits 2004 - 2020 model year Ford F150 trucks. If you own an F150 that is equipped with a suspension lift or leveling kit you may be experiencing Upper Control Arm to coil contact. SPC designed their upper control arm to provide more clearance between the arm and the front shock assembly (and frame) which helps prevent clunking and clanking. This # 25680 Upper Arm will fit all 2wd and 4x4 models.

The SPC Adjustable UCA (Upper Control Arm) design and materials allow for an increase in suspension droop or rebound travel and a much wider range of alignment options. These Upper Control Arms have approximately 15* more articulation capability than factory OEM arms. 80* degrees for SPC Upper Arm vs. 65* degrees for the stock ball joint. If your stock factory Nissan control arms had sufficient travel in the ball joint these SPC arms will not be the limiting factor to suspension travel! SPC Upper Control Arms are designed to clear the coil bucket on most Ford vehicles. Minor grinding on the frame may be necessary on certain vehicles that have a very large flange / lip on the strut mounting pocket. The material necessary for removal is minor and the flange is not structural.

Features:
NEW SpecRide Bushings
Free Moving Pivot Sleeve which eliminates failures caused by high travel suspensions
Noise and vibration control
Ozone, oil and alkaline resistant material
Front Adjustment range: Camber +/-2.00 degrees, Caster +/- 2.00 degrees
Installation time: Approximately 1 hour per side

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated xAxis™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop travel.

For more information on this or any other Specialty Products Company product please click on the "ask a question" link located at the very top of this page.

This item ships for free via standard ground service to any address in the 50 United States of America!