SPC Toyota FJ Cruiser & 4Runner Upper Control Arm # 25480
SPC has new Minimum Advertised Price rules that took effect on September 1, 2022. All dealers must now advertise SPC products at a preset price. Please click on the ASK A QUESTION link at the very top left of this page to request an easy to use Preferred Customer Discount Code for this item.
This SPC Upper Control Arm # 25480 is designed for use on 2003+ Toyota 4 Runner or 2007+ Toyota FJ Cruiser that has run out of factory adjustment after a suspension lift kit has been installed. Additionally, these SPC Upper Control Arms provide an increase in strength, additional suspension travel, and a wide range of alignment adjustment options. These SPC heavy duty replacement upper control arms feature DOM tubing construction and uses a patented adjustable ball joint and new SpecRide bushings. Built with an OE style ball joint these upper control arms correct the alignment angles while maintaining factory ride quality. Keep reading below for more product information...
| Brand | SPC |
|---|---|
| Manufacturer | SPC |
| Part Number | 25480 |
| MPN | 25480 |
| GTIN | 082642254805 |
| Vehicle Year | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003 |
| Vehicle Make | Toyota |
| Vehicle Model | 4Runner, FJ Cruiser |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | No |
SPC Upper Control Arm Kit # 25480 fits 2003+ Toyota 4Runner and 2008 - 2014 Toyota FJ Cruiser. Specialty Products Company designed their Toyota FJ Cruiser and 4Runner Upper Control Arm Kit to provide Toyota owners with an awesome replacement upper control arm at a very reasonable price. The SPC design provides for a significant Camber and Caster change to help correct ride quality and tire wear issues that are common after a lift or leveling kit has been installed. This design provides an increase in articulation over the factory OE ball joint while still providing more clearance for the spring and tire than the OE arm does. The included xAxis bushings are greased and sealed and the OE style ball-joint assembly includes a grease fitting and boot. And the best part of the SPC design is that it offers more strength in critical areas than the OE upper control arm does. This extra strength is necessary and beneficial to survice extreme off-road use when a Toyota SUV is taken off the pavement.
NEW xAxis Bushings
Free Moving Ball eliminates failures caused by high travel suspensions
Noise and vibration control
Ozone, oil and alkaline resistant material
Front Adjustment range: Camber +/-2.00 degrees, Caster 0.0 degree to +4.00 degrees
Installation time: Approximately 1 hour per side
The SPC Upper Control Arm # 25480 features a unique hybrid tubular and forged steel design that is tough enough to race.. on or off-road. If your stock upper control arms had sufficient travel in the ball joint these SPC arms will not be the limiting factor to suspension travel! The OEM style sealed high-angle ball joint allows for sufficient travel without the squeaks and rattles commonly caused by un-sealed Uniball style control arms. The hybrid tubular steel design is tough enough to survive even the harshest usage. These SPC arms can be used in conjunction with the factory alignment cams to maximize clearance in the wheel well.
For more information on this or any other Specialty Products Company product please click on the "ask a question" link located at the very top of this page.
| Brand | SPC |
|---|---|
| Manufacturer | SPC |
| Part Number | 25480 |
| MPN | 25480 |
| GTIN | 082642254805 |
| Vehicle Year | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003 |
| Vehicle Make | Toyota |
| Vehicle Model | 4Runner, FJ Cruiser |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | No |
