RCD 2011-2019 Silverado & Sierra 2500HD 4" to 6" Lift Kit # 10-41811
This RCD 10-41811 kit fits the 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019 Chevrolet Silverado 2500HD and GMC Sierra 2500HD 8-lug vehicles only! If you are looking for one of the best (not to mention easiest to install) kits on the market the RCD kit is for you. Race Car Dynamics has been building one of the finest GM kits for the new GM trucks for years... and over the years their attention to detail and quality construction has proven the kits are as reliable as they are good looking. The major advantage this RCD kit has over other similar kits is simplicity and the use of Bilstein 5100 series shock absorbers. No replacement front driveshaft is needed and installation is relatively easy compared to other more complicated kits. This kit includes the awesome Bilstein shock absorbers that have been specially valved to work with this lift and your truck. This means your truck will ride as good as it looks!
Keep reading below for more information...
| Brand | Race Car Dynamics |
|---|---|
| Manufacturer | RCD Suspension |
| Part Number | 10-41811 |
| MPN | 10-41811 |
| Vehicle Year | 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011 |
| Vehicle Make | Chevrolet, GMC |
| Vehicle Model | Sierra 2500HD, Sierra 3500 SRW, Silverado 2500HD, Silverado 3500 SRW |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
RCD is proud to offer their 4-6" suspension lift system # 10-41811 that is designed for use on 2011 - 2019 Chevrolet Silverado 2500HD and GMC Sierra 2500HD trucks. This front suspension lift is adjustable between 4" and 6" inches. The front subframe drops the front differential down enough so that when the height is adjusted to 6" inches over stock the front CV axle shafts maintain a very safe operating angle. The provided 4" lift blocks are designed to provide a level stance when the front of the truck is lifted 6" inches.
CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry... Machined Axle Spacers Maintain Proper Axle Lengths... Heavy Duty Two Piece Lower Sub-Frame Assembly and Polished Stainless Steel Twin -Link Anti-Compression Struts Insure Structural Strength and Durability.... CNC Machined, Zinc Plated Billet Steel Sway Bar Links with Over-Size Urethane Bushings Optimize Sway Bar Geometry and Function... RCD Gator Black Polyurethane Powder Coat Finish for Lasting Good Looks... Grade 8 Hardware for Reliability... Four Custom Matched Bilstein Monotube Gas Pressure Shocks for Maximum Performance and Ride Characteristics - No Drive Shaft Modifications Necessary for Installation!
Tire Size Information:
This kit will clear up to a 37 x 12.50 size tire with trimming required. Don't want to trim anything? Run 35" tires on a 9" or narrower wheel with the correct back space and you will have sufficient clearance. Use of 10" or wider wheels may require either the installation of smaller diameter tires (smaller than 35") or more trimming... or both! Factory wheels will NOT work with this lift. Aftermarket 18" diameter or larger wheels are recommend.
Recommended Wheel Size:
18 x 9 -- Maximum Back Space = 5.75"
20 x 9 -- Maximum Back Space = 6.00"
This item ships for FREE via Standard Ground Service to any address located in the 48 United States of America!
| Brand | Race Car Dynamics |
|---|---|
| Manufacturer | RCD Suspension |
| Part Number | 10-41811 |
| MPN | 10-41811 |
| Vehicle Year | 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011 |
| Vehicle Make | Chevrolet, GMC |
| Vehicle Model | Sierra 2500HD, Sierra 3500 SRW, Silverado 2500HD, Silverado 3500 SRW |
| Drive Type | 2-Wheel Drive, 4-Wheel Drive |
| Made In USA | Yes |
