ReadyLift 2015 - 2020 GM SUV 1500 4" SST Lift Kit # 69-3496
ReadyLIFT offers owners of a 2015 - 2020 Chevrolet Avalanche 1500, Tahoe, Suburban 1500, GMC Yukon or Yukon XL 1500 a suspension lift kit solution that provides additional ground clearance and more room for larger than stock size tires. This kit is designed for use on 2WD & 4WD models. The ReadyLIFT # 69-3496 GM SUV/SUT 1500 Lift Kit will raise your vehicle 4" in front and 3" in the rear. The 69-3496 SST Lift Kit is a complete front-rear suspension system featuring the popular ReadyLIFT GM front spacers and upper control arms. The rear 3" lift is achieved with a new rear spring lift design in the form of a strong welded steel rear coil spring spacer. Rear shock extensions allow this combination of lifting components to provide the proper lift without compromising the ride quality or the factory geometry. Each kit comes complete with hardware and intuitive instructions detailing the steps required for installation. The 69-3496 lift kit allows for installation of up to 33" tires.
Keep reading below for more product information...
Manufacturer | ReadyLIFT |
---|---|
Part Number | 69-3496 |
Vehicle Year | 2020, 2019, 2018, 2017, 2016, 2015 |
Vehicle Make | Chevrolet, GMC |
Vehicle Model | Suburban 1500, Tahoe, Yukon, Yukon XL |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |
ReadyLift 4" / 3" SST Lift Kit # 69-3496 is designed for use on 2015, 2016, 2017, 2018, 2019 and 2020 GM 1500 series SUV and SUT vehicles. GM has always designed their fullsize vehicles with the front end sitting lower than the rear. On these vehicles the front valance is closer to the ground than earlier models. More and more consumers are discovering that their GM Tahoe, Suburban or Yukon looks much better with a lifted stance that provides more ground clearance and room for larger than stock size tires. If you are tired of scraping the plastic "nose" on your vehicle a lift should fix that!
The ReadyLIFT 4.0" SST Lift Kit will raise the 2015-2020 Chevy Suburban, Chevy Tahoe and GMC Yukon 1500 4WD SUVs 4.0" in front thanks to tough trail-proven 4.0" powdercoated steel strut extensions that bolt directly to the top of the factory strut. Unlike some kits which require you to cut off your strut studs or break the top hat seal which are irreversible modifications, the ReadyLift strut extensions require no modifications to be made to the strut in order to install the extension. This guarantees the strut will maintain the factory integrity as well as drastically reducing installation time.
Two key products were developed to make achieving 4" of lift without modifications a possibly. At the heart of the system is the all-new 100% DOM tubular upper control arm. This new heavy-duty control arm features OEM-style ball joints pre-pressed into a strong crown that retains OEM geometry throughout the suspension cycle and doesn't require any modifications to the spindle. That means no drilling or machining to make the ball joints fit the spindle. The new Control Arms include TCT polyurethane bushings. The second important product that makes this kit possible is our Patent Pending CNC-machined 6061-T6 billet Aluminum differential drop brackets. When raising the front suspension 4.0" the differential must be lowered to maintain front axle and CV angles. ReadyLIFT has engineered a differential drop system that cuts installation time in half compared to other similar kits. Unlike other differential drop brackets made from steel plate that bends and can cause CV failure, our CNC-machined brackets cannot ever bend, break or cause any driveline problems when using 4WD mode. That is guaranteed!
Accompanying the patent pending differential drop brackets is a thick powder coat plate steel skid plate that utilizes the factory attachment locations for ease of installation while providing tough differential protection when off roading. To lift the rear of the GM coil spring-equipped SUVs, this lift system includes 3.0" powder coat steel coil spring spacers. The strong coil spacers insert into and top of the factory spring which maintains the great factory ride! In addition, a slight rake is helpful for towing or hauling. New longer and stronger rear sway bar end links and bump stop extensions are also provided to keep the rear suspension working properly.
Completing this great new lift system are a set of steel rear shock extensions. No need to replace your great-riding factory rear shocks with inferior aftermarket shocks. These new shock extension brackets keep the rear shocks in the factory mounting position which means your truck will ride great! And that's important! Like all ReadyLIFT products, the 69-3496 SST Lift Kit System is protected by their Limited Lifetime Warranty and ReadyGuard PowerTrain Warranty.
Important Fitment Notes:
This ReadyLift # 69-3496 will NOT work with rear air suspension equipped models. Not for use on AWD vehicles! Installation of this kits may cause rear axle shift and an adjustable rear track bar or drop bracket may be required. This system will only fit Cast Aluminum and Stamped Steel suspension equipped vehicles. If your vehicle has Cast Steel suspension this lift will NOT fit!
Tire & Wheel Information:
This kit is designed for use with aftermarket wheels! This ReadyLift Suspension Lift significantly increases ground clearance while allowing for tire sizes up to 33" tire on an aftermarket wheel. The most common tire size for this application is 33x12.50 (max). In order to install a 33x12.50 (305/55/20) with aftermarket wheels, some minor trimming of the inner fenderwell may be required. 22x9.5 with 5.5" backspacing requires no fender modifications. 17x9 +0 offset on a 285/70R17 will fit with no rubbing. With a 295/70r17 minor trimming/modification required. If you intend to run the stock wheels and tires, a wheel spacer is required to prevent the factory tire from touching the control arm at full locked turn. ReadyLIFT has developed a CNC-machined billet Aluminum wheel spacer 10-3485 for use with factory wheels which have the stud pockets cast into the wheel next to the lug holes on the back side of the wheel.
Installation:
This Suspension Lift Kit can be installed using basic hand tools and does NOT require the use of a strut or spring compressor. Detailed printed instructions are included that provide you with all of the information you will need to install this leveling kit. An alignment will be necessary upon completion.
If you have any questions on this or any other ReadyLift product please click on the "ask a question" link located at the very top of this page.
This item ships for FREE via standard ground service to any address in the 50 United States of America!
Manufacturer | ReadyLIFT |
---|---|
Part Number | 69-3496 |
Vehicle Year | 2020, 2019, 2018, 2017, 2016, 2015 |
Vehicle Make | Chevrolet, GMC |
Vehicle Model | Suburban 1500, Tahoe, Yukon, Yukon XL |
Drive Type | 2-Wheel Drive, 4-Wheel Drive |
Made In USA | Yes |