PSS 2010-2011 Ford Raptor Steering Reservoir & Cooler Upgrade # PSS4007
This item has been discontinued by the manufacturer and is no longer available for purchase.
After hours of suspension testing and offroad abuse on the ICON Vehicle Dynamics Ford F-150 SVT Raptor it was determined the OE steering system needed some upgrading. When pushing the Raptor hard the factory power steering system would start to aerate the fluid. This aeration leads to foaming which causes air bubbles in the fluid and this leads to a situation where the pump can produce a whining or "growling" noise. Air bubbles are compressible and fluid pumps do NOT LIKE AIR in the system! Hydraulic brake systems have reduced performance when air is present in the lines. The same is true of the power steering system on your Raptor. Keep reading below to find out how this Power Steering Solution solves this problem!| Manufacturer | Power Steering Solution |
|---|---|
| Part Number | PSS4007 |
| Vehicle Year | 2011, 2010 |
| Vehicle Make | Ford |
| Vehicle Model | F150 Raptor |
| Drive Type | 4-Wheel Drive |
| Made In USA | Yes |
Power Steering Solution part # PSS4007. Fits 2010 and 2011 Ford Raptor trucks. Excessive aeration and elevated fluid temperature can damage the power steering pump and the seals in the system itself. These symptoms can ultimately lead to reduced life of the pump and reduced performance from the steering rack. Power Steering Solution has developed a high performance billet aluminum reservoir that not only increases the overall fluid volume but also includes an anti-cavitation valve as well. The PSS4007 provides a combination of cutting edge design and engineering that has led to an easy to install bolt on reservoir upgrade that installs within 30 minutes, in the OEM location, with factory hoses and hardware. The CNC machined power steering reservoir also includes a threaded O-Ring Cap with a 12psi pop off valve to eliminate increased pressure build during extreme use conditions. The included cooler helps reduce operating temps which helps increase power steering fluid and component life while maintaining a more consistent steering feel.
Key Features:
Direct bolt in replacement w/ no additional components required (additional fluid supplied)
CNC machined from 6061 aircraft grade aluminum
Threaded o-ring cap w/ 12psi pop off valve
Built in anti-cavitation valve designed to eliminate fluid aeration / foaming
Increased power steering reservoir fluid volume with increased flow
High end AN fittings for factory-like seal to OEM power steering lines
Made in the USA!
Bolts on easily with basic hand tools
Includes additional fluid required for installation
This PSS4007 kit will include 1 Fully assembled & ready to install PSS reservoir, external cooler, and 1 quart of power steering fluid. All necessary hardware required for installation is included. Please note that these parts are Model Year specific. 2010 and 2011 Raptor models require the PSS4007 kit. 2012, 2013 and 2014 Raptors will require the PSS4007-1 kit.
This item ships for FREE via standard Ground service to any address in the 48 United States of America! Alaska, Hawaii and International customers must contact PerformanceLifts.com to receive a shipping quote before placing an order.
| Manufacturer | Power Steering Solution |
|---|---|
| Part Number | PSS4007 |
| Vehicle Year | 2011, 2010 |
| Vehicle Make | Ford |
| Vehicle Model | F150 Raptor |
| Drive Type | 4-Wheel Drive |
| Made In USA | Yes |
