PSS 2012-2014 Ford Raptor Steering Reservoir & Cooler Upgrade # PSS4007-1
This item has been discontinued by the manufacturer and is no longer available for purchase.
After hours of testing and off-road abuse it was determined the Ford F-150 SVT Raptor OE steering system needed some upgrading. When pushing the Raptor hard the factory power steering system will start to aerate the fluid. Aeration leads to foaming and this causes the pump to produce a whining or "growling" noise. Air bubbles are compressible and fluid pumps do NOT LIKE AIR in the system! Just like a hydraulic brake system experiences reduced performance when air is present in the lines the same is true of the power steering system on your Raptor. This Power Steering Solution Reservoir and Cooler upgrade helps fix the factory deficiencies! Keep reading below for more details...
| Manufacturer | Power Steering Solution |
|---|---|
| Part Number | PSS4007-1 |
| Vehicle Year | 2014, 2013, 2012 |
| Vehicle Make | Ford |
| Vehicle Model | F150 Raptor |
| Drive Type | 4-Wheel Drive |
| Made In USA | Yes |
Power Steering Solution Ford Raptor Power Steering Solution kit # PSS4007-1. Fits 2012, 2013 and 2014 model year Ford F150 Raptor trucks only. Will not fit earlier models. The PSS4007-1 provides a combination of cutting edge design and engineering that has led to an easy to install bolt on reservoir upgrade that installs within 30 minutes, in the OEM location, with factory hoses and hardware. The CNC machined power steering reservoir also includes a threaded O-Ring Cap with a 12psi pop off valve to eliminate increased pressure build during extreme use conditions. The included cooler helps reduce operating temps which helps increase power steering fluid and component life while maintaining a more consistent steering feel. The factory reservoir design can ultimately lead to reduced life of the pump and reduced performance from the steering rack. Power Steering Solution has developed a high performance billet aluminum reservoir that not only increases the overall fluid volume but also includes an anti-cavitation valve as well.
Key Features:
Direct bolt in replacement w/ no additional components required (additional fluid supplied)
CNC machined from 6061 aircraft grade aluminum
Threaded o-ring cap w/ 12psi pop off valve
Built in anti-cavitation valve designed to eliminate fluid aeration / foaming
Increased power steering reservoir fluid volume with increased flow
High end AN fittings for factory-like seal to OEM power steering lines
Made in the USA!
Bolts on easily with basic hand tools
Includes additional fluid required for installation
This PSS4007-1 kit will include 1 Fully assembled & ready to install PSS reservoir, external power steering fluid cooler, and 1 quart of power steering fluid. All necessary hardware required for installation is included. Please note that these parts are Model Year specific! The 2010 and 2011 Raptor models will require a different part number: PSS4007 kit. Raptor model years 2012 and newer require the PSS4007-1 kit.
| Manufacturer | Power Steering Solution |
|---|---|
| Part Number | PSS4007-1 |
| Vehicle Year | 2014, 2013, 2012 |
| Vehicle Make | Ford |
| Vehicle Model | F150 Raptor |
| Drive Type | 4-Wheel Drive |
| Made In USA | Yes |
